79 citations as recorded by crossref.

1. Design and Experimental Study of a Novel Full-ocean-depth Pressure-retaining Sediment Sampler S. He et al.
2. Pressure coring operations during The University of Texas-Gulf of Mexico 2-1 (UT-GOM2-1) Hydrate Pressure Coring Expedition in Green Canyon Block 955, northern Gulf of Mexico C. Thomas et al.
3. Characterization of a stratigraphically constrained gas hydrate system along the western continental margin of Svalbard from ocean bottom seismometer data A. Chabert et al.
4. Thermodynamic Characteristics and Impact Mechanisms of Core Barrels in Pressure-Preserved Coring Retrieval T. Lin et al.
5. A Pressure and Temperature Preservation System for Gas-hydrate-bearing Sediments Sampler H. Zhu et al.
6. Structural Design and Dynamic Simulation Optimization of the Triggering Device in a Pressure-Holding Controller for Deep in Situ Coring M. Xu et al.
7. Adaptive metamodel-based analytical target cascading for natural gas hydrates coring tool design optimization J. Zheng et al.
8. In-situ temperature-pressure preserved coring for onshore deep oil and gas exploration: research on the design principles and mechanical properties of the temperature-preserved core chamber Y. Zhang et al.
9. Thermal properties of highly saturated methane hydrate-bearing sediments recovered from the Krishna–Godavari Basin M. Muraoka et al.
10. Experimental study on a pressure-coring technology based on a freeze-core valve for marine hydrate-bearing sediment sampling D. Wu et al.
11. Overpressure zone under the Krishna–Godavari offshore basin: geophysical implications for natural hazard in deeper-water drilling R. Chatterjee et al.
12. Pressure-retaining sampler for sediment and overlying seawater based on heavy duty ROV-Jellyfish J. Guo et al.
13. A state-of-the-art review and prospect of gas hydrate reservoir drilling techniques N. Wei et al.
14. Multi-property characterization chamber for geophysical-hydrological investigations of hydrate bearing sediments Y. Seol et al.
15. Research and Analysis of 30-m Gravity Piston Corer for Natural Gas Hydrate Z. Ren et al.
16. Thermal properties of methane hydrate‐bearing sediments and surrounding mud recovered from Nankai Trough wells M. Muraoka et al.
17. Review of permeability analysis methods in gas hydrate-bearing natural sediments with high permeability characteristics Z. Xu & Y. Konno
18. A new method of coring in coal mine: pressure-holding and continuous coring technology Z. Fajun et al.
19. Methane Hydrates in Nature—Current Knowledge and Challenges T. Collett et al.
20. Application of Resonance Enhanced Drilling to coring S. Li et al.
21. India National Gas Hydrate Program Expedition 02 summary of scientific results: Evaluation of natural gas-hydrate-bearing pressure cores R. Boswell et al.
22. Reliability analysis and multi-objective optimization of pressure sealing subsystem for in situ pressure-preserved coring D. Guo et al.
23. Seismic rock physical modelling for gas hydrate-bearing sediments X. Liu et al.
24. Diatom influence on the production characteristics of hydrate-bearing sediments: Examples from Ulleung Basin, offshore South Korea J. Jang et al.
25. Design and mechanical optimization of multidirectional pressure-preserved coring system for deep-earth resource exploration G. Liu et al.
26. Occurrence and exploration of gas hydrate in the marginal seas and continental margin of the Asia and Oceania region R. Matsumoto et al.
27. Subsurface gas hydrates in the northern Gulf of Mexico R. Boswell et al.
28. Development of applicable ice valves for ice-valve-based pressure corer employed in offshore pressure coring of gas hydrate-bearing sediments X. Zhang et al.
29. Optimisation of freezing efficiency of hole-bottom freezing technique for gas hydrate sampling: Study on factors influencing dry ice phase transition W. Guo et al.
30. The Innovative Design of Deep In Situ Pressure Retained Coring Based on Magnetic Field Trigger Controller G. Liu et al.
31. Research and application of thermal insulation effect of natural gas hydrate freezing corer based on the wireline-coring principle Y. Hu et al.
32. In Situ Mechanical Properties of Shallow Gas Hydrate Deposits in the Deep Seabed J. Yoneda et al.
33. A Quick Look Method to Assess the Dependencies of Rock Physical Sediment Properties on the Saturation With Pore‐Filling Hydrate E. Spangenberg et al.
34. Research on pressure‐stabilizing system for transfer device for natural gas hydrate cores Q. Gao et al.
35. Intersecting-Contact Sealing Mechanism Analysis and Experimental Investigation of Pressure-Preserved Coring Controller in Deep Coal Seams J. Li et al.
36. Natural Gas Hydrates Recovered from the Umitaka Spur in the Joetsu Basin, Japan: Coexistence of Two Structure-I Hydrates with Distinctly Different Textures and Gas Compositions within a Massive Structure Y. Jin et al.
37. Contact performance analysis of pressure controller's sealing interface in deep in-situ pressure-preserved coring system J. Li et al.
38. Evidence from three‐dimensional seismic tomography for a substantial accumulation of gas hydrate in a fluid‐escape chimney in the Nyegga pockmark field, offshore Norway A. Plaza‐Faverola et al.
39. The Viscoplastic Behavior of Natural Hydrate‐Bearing Sandy‐Silts Under Uniaxial Strain Compression (K0 Loading) A. Cardona et al.
40. Development of a pressure coring system for the investigation of deep underground exploration D. Guo et al.
41. Structural Improvement of Differential Motion Assembly in In Situ Pressure-Preserved Coring System Using CFD Simulation D. Guo et al.
42. India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas hydrate systems along the eastern continental margin of India T. Collett et al.
43. In-situ pressure-preserved coring for deep resources exploration: A novel pressure sealing subsystem and its service performance D. Guo et al.
44. In Situ Methane Hydrate Morphology Investigation: Natural Gas Hydrate-Bearing Sediment Recovered from the Eastern Nankai Trough Area Y. Jin et al.
45. Acoustic response of gas hydrate formation in sediments from South China Sea G. Hu et al.
46. In-situ pressure-preserved coring for deep oil and gas exploration: Design scheme for a coring tool and research on the in-situ pressure-preserving mechanism D. Guo et al.
47. Detection of seismic anisotropy using ocean bottom seismometers: a case study from the northern headwall of the Storegga Slide R. Exley et al.
48. Coring and analysis technologies for natural gas hydrate reservoirs: achievements, obstacles, and future directions M. Xu et al.
49. A new hybrid pressure-coring system for the drilling vessel <i>Chikyu</i> Y. Kubo et al.
50. Gas Loss Characteristics of Coalbed Methane-Containing Coal Sampled Using a Freezing Method J. Zhu et al.
51. Geological occurrence and accumulation mechanism of natural gas hydrates in the eastern Qiongdongnan Basin of the South China Sea: Insights from site GMGS5-W9-2018 J. Liang et al.
52. Research on in-situ condition preserved coring and testing systems H. Xie et al.
53. Deep original information preservation by applying in-situ film formation technology during coring L. Zhu et al.
54. Scientific results of the Second Gas Hydrate Drilling Expedition in the Ulleung Basin (UBGH2) B. Ryu et al.
55. Geologic implications of gas hydrates in the offshore of India: Results of the National Gas Hydrate Program Expedition 01 T. Collett et al.
56. Dissociation of Fresh- And Seawater Hydrates along the Phase Boundaries between 2.3 and 17 MPa M. Loh et al.
57. In Situ Curing of a Polymer Film for Light‐Proof Coring of Deep Rocks with Preservation of Rock Quality and Moisture Z. Zhao et al.
58. Numerical computation and experimental assessment of a pressure-retaining gas-tight sediment sampler S. He et al.
59. Research on Pressure-Retaining Performance of Transfer Device for Abyssal Sediments J. Xiao et al.
60. Hole-bottom freezing method for gas hydrate sampling Y. Sun et al.
61. Pressure-holding transfer and testing techniques for natural gas hydrate reservoir core: a brief review Q. Gao et al.
62. Elevated gas hydrate saturation within silt and silty clay sediments in the Shenhu area, South China Sea X. Wang et al.
63. Overview and introduction: Pressure core-sampling and analyses in the 2012–2013 MH21 offshore test of gas production from methane hydrates in the eastern Nankai Trough K. Yamamoto
64. The Design and Application of a New Wireline Pressure Coring System for the Guangzhou Marine Geological Survey Methane Hydrate Expedition in the South China Sea Q. Lu et al.
65. Analysis of Penetration Performance Between a Hollow Penetrator and Seabed Clay by Coupled Eulerian–Lagrangian Method J. Liang et al.
66. Development and testing of a pressure core processing and analysis system Q. Gao et al.
67. Design and verification of pressure-preserved computed tomography testing for deep oil and gas exploration X. Fang et al.
68. Development of a pressure-retaining separation and transfer system for sediment and overlying seawater J. Guo et al.
69. Measuring the in Situ Hydrate Saturation from γ-Ray Transmissivity Changes during Local Dissociation S. Falser et al.
70. Research progress and application of deep in-situ condition preserved coring and testing H. Xie et al.
71. Pressure coring a Gulf of Mexico deep-water turbidite gas hydrate reservoir: Initial results from The University of Texas–Gulf of Mexico 2-1 (UT-GOM2-1) Hydrate Pressure Coring Expedition P. Flemings et al.
72. Mechanical properties of hydrate-bearing turbidite reservoir in the first gas production test site of the Eastern Nankai Trough J. Yoneda et al.
73. Development of a pressure-retained transfer system of seafloor natural gas hydrates J. Chen et al.
74. Pressure and temperature preservation techniques for gas-hydrate-bearing sediments sampling H. Zhu et al.
75. Review and Analysis of Key Techniques in Marine Sediment Sampling S. He et al.
76. Design and strength analysis of the passive thermal insulation structure of a deep rock in-situ thermal insulation coring system X. Shi et al.
77. Sampling disturbance in hydrate-bearing sediment pressure cores: NGHP-01 expedition, Krishna–Godavari Basin example S. Dai & J. Santamarina
78. Novel designs of pressure controllers to enhance the upper pressure limit for gas-hydrate-bearing sediment sampling C. Li et al.
79. Pore-scale observations of natural hydrate-bearing sediments via pressure core sub-coring and micro-CT scanning L. Lei et al.