33 citations as recorded by crossref.

1. Drilling to investigate processes in active tectonics and magmatism J. Shervais et al. https://doi.org/10.5194/sd-18-19-2014
2. Fault-Drilling Investigation of Earthquake Slip Behavior and Physicochemical Processes T. HIRONO et al. https://doi.org/10.5026/jgeography.122.323
3. Fault rock lithologies and architecture of the central Alpine fault, New Zealand, revealed by DFDP-1 drilling V. Toy et al. https://doi.org/10.1130/L395.1
4. Constraining Microfractures in Foliated Alpine Fault Rocks With Laser Ultrasonics J. Simpson et al. https://doi.org/10.1029/2020GL087378
5. Cross-correlation-based detection and characterisation of microseismicity adjacent to the locked, late-interseismic Alpine Fault, South Westland, New Zealand C. Chamberlain et al. https://doi.org/10.1016/j.epsl.2016.09.061
6. Spatial Dependence of Dynamic Nonlinear Rock Weakening at the Alpine Fault, New Zealand J. Simpson et al. https://doi.org/10.1029/2021GL093862
7. Composition, Alteration, and Texture of Fault-Related Rocks from Safod Core and Surface Outcrop Analogs: Evidence for Deformation Processes and Fluid-Rock Interactions K. Bradbury et al. https://doi.org/10.1007/s00024-014-0896-6
8. The effect of temperature on the nonlinear elasticity of a fault rock in dynamic acoustoelastic testing (DAET) experiments J. Simpson et al. https://doi.org/10.1093/gji/ggad237
9. Near-surface clay authigenesis in exhumed fault rock of the Alpine Fault Zone (New Zealand); O-H-Ar isotopic, XRD and chemical analysis of illite and chlorite A. Boles et al. https://doi.org/10.1016/j.jsg.2018.03.008
10. Structural heterogeneity of the midcrust adjacent to the central Alpine Fault, New Zealand: Inferences from seismic tomography and seismicity between Harihari and Ross S. Bourguignon et al. https://doi.org/10.1002/2014GC005702
11. Effects of temperature on the frictional behavior of material from the Alpine Fault Zone, New Zealand R. Valdez et al. https://doi.org/10.1016/j.tecto.2019.04.022
12. Damaged beyond repair? Characterising the damage zone of a fault late in its interseismic cycle, the Alpine Fault, New Zealand J. Williams et al. https://doi.org/10.1016/j.jsg.2016.07.006
13. The effect of sub-seismic fault slip processes on the isotopic signature of clay minerals – Implications for K-Ar dating of fault zones H. Zwingmann et al. https://doi.org/10.1016/j.chemgeo.2019.03.034
14. Frictional strength, rate-dependence, and healing in DFDP-1 borehole samples from the Alpine Fault, New Zealand M. Ikari et al. https://doi.org/10.1016/j.tecto.2014.05.005
15. Strength and deformation behavior of the Shimanto accretionary complex across the Nobeoka thrust H. Kitajima et al. https://doi.org/10.1111/iar.12192
16. Scientific Drilling Into the San Andreas Fault Zone m. Zoback et al. https://doi.org/10.1029/2010EO220001
17. Hydraulic and acoustic properties of the active Alpine Fault, New Zealand: Laboratory measurements on DFDP-1 drill core B. Carpenter et al. https://doi.org/10.1016/j.epsl.2013.12.023
18. Fault zone architecture of a large plate-bounding strike-slip fault: a case study from the Alpine Fault, New Zealand B. Schuck et al. https://doi.org/10.5194/se-11-95-2020
19. Frictional properties of exhumed fault gouges in DFDP‐1 cores, Alpine Fault, New Zealand C. Boulton et al. https://doi.org/10.1002/2013GL058236
20. Seismic Anisotropy and Its Impact on Imaging the Shallow Alpine Fault: An Experimental and Modeling Perspective L. Adam et al. https://doi.org/10.1029/2019JB019029
21. Is the Earth Lazy? A review of work minimization in fault evolution M. Cooke & E. Madden https://doi.org/10.1016/j.jsg.2014.05.004
22. Shear behavior of DFDP-1 borehole samples from the Alpine Fault, New Zealand, under a wide range of experimental conditions M. Ikari et al. https://doi.org/10.1007/s00531-014-1115-5
23. Large‐displacement, hydrothermal frictional properties of DFDP‐1 fault rocks, Alpine Fault, New Zealand: Implications for deep rupture propagation A. Niemeijer et al. https://doi.org/10.1002/2015JB012593
24. Frictional properties and 3-D stress analysis of the southern Alpine Fault, New Zealand C. Boulton et al. https://doi.org/10.1016/j.jsg.2018.06.003
25. Residual stress preserved in quartz from the San Andreas Fault Observatory at Depth K. Chen et al. https://doi.org/10.1130/G36443.1
26. Internal structure of the Median Tectonic Line fault zone, SW Japan, revealed by borehole analysis N. Shigematsu et al. https://doi.org/10.1016/j.tecto.2012.01.024
27. Slip localization on the southern Alpine Fault, New Zealand N. Barth et al. https://doi.org/10.1002/tect.20041
28. Petrophysical, Geochemical, and Hydrological Evidence for Extensive Fracture‐Mediated Fluid and Heat Transport in the Alpine Fault's Hanging‐Wall Damage Zone J. Townend et al. https://doi.org/10.1002/2017GC007202
29. Variations in Seismogenic Thickness Along the Central Alpine Fault, New Zealand, Revealed by a Decade's Relocated Microseismicity K. Michailos et al. https://doi.org/10.1029/2018GC007743
30. Microseismicity and stress in the vicinity of the Alpine Fault, central Southern Alps, New Zealand C. Boese et al. https://doi.org/10.1029/2011JB008460
31. Sub-crustal earthquakes within the Australia–Pacific plate boundary zone beneath the Southern Alps, New Zealand C. Boese et al. https://doi.org/10.1016/j.epsl.2013.06.030
32. Elastic Properties and Seismic Anisotropy Across the Alpine Fault, New Zealand T. Jeppson & H. Tobin https://doi.org/10.1029/2020GC009073
33. Seismic P Wave Velocity Model From 3‐D Surface and Borehole Seismic Data at the Alpine Fault DFDP‐2 Drill Site (Whataroa, New Zealand) V. Lay et al. https://doi.org/10.1029/2019JB018519